Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 54 / 224

— CAL.JUST 1.9 - Calibration, adjustment
— CAL.EXT. 1.9.1 - External calibration with default weight*
— CAL.E.AUT. 1.9.2 - External calibration, weight is detected
(see Chapter 6.3.1.1.1 menu item 1.18.1)
[HND.EXT.G]- [CAL.JUST]
— CAL.E.USR. 1.9.3 - External calibration with user weight
— CAL.INT. 1.9.4 - Internal calibration (IS scales only)
— LIN.INT.
1.9.5 - Internal linearization (IS scales only)
1)
— LIN.EXT. 1.9.6 - External linearization with standard
weights
1)
— LIN.E.USR
1.9.7 - External linearization with user weights
1)
— SET.VORL 1.9.8 - Set preload
— CLR.VORL 1.9.9 - Delete preload
— GESPRT. 1.9.10 - Key locked
Procedure
5.6.5 Function assignment of the "ISO test"key
The calibration/adjustment function is normally triggered by pressing and holding down
the
. For detailed information on calibration and adjustment, see Chapter 7.2 .
When the service mode is activated, further functions can be assigned to the key:
- External linearization with default weights (menu item [LIN.EXT] 1.9.6)
- External linearization with the linearization weights entered under menu item
[HND.EXT.G] 1.18 (menu item [LIN.E.USR.] 1.9.7)
- Internal linearization (only for WP-2) (menu item [LIN.INT.] 1.9.5)
- Set preload (menu item [SET.VORL.] 1.9.8) (only possible when calibration is not
mandatory)
- Delete preload (menu item [CLR.VORL.] 1.9.9) (only possible when calibration is not
mandatory)
Note:
After linearization or after a preload has been set or deleted, the key must be
reassigned its original function, e.g.external calibration/adjustment with default
weights (menu item [CAL.EXT.] 1.9.1).
Menu tree for assigning functions to the key
Menu: [SETUP]- [WP-1]- [INTERN.]- [PARAM.1]- [CAL.JUST] (1.9) (see also
Chapter 6.3.1.1.1 ).
* Factory setting
1. Activate service mode (only necessary if linearization weights are entered) (see
Chapter 5.6.2 ).
2. Select the weighing platform.
3. Enter external user calibration weight (menu item [CAL.JUST.] 1.18.1).
4. Enter external linearization weights (menu items [LIN.GEW.1] 1.18.2 … [LIN.GEW.4]
1.18.5).
Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started
EN-52 Minebea Intec