Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 12 / 224

2 Safety instructions
2.1 General information
NOTICE
Warning of damage to property and/or the environment.
The product complies with the directives and standards on electrical equipment,
electromagnetic compatibility, and the prescribed safety requirements. However,
improper use can cause damage to persons and property.
The product was in perfect condition with regard to safety features when it left the
factory.
To maintain this condition and to ensure safe operation, the user must follow the
instructions and observe the warnings in this manual.
2.2 Intended use
The Combics 2 is a robust complete scale for daily production and quality control in
industrial applications. Any use deviating from this is considered improper.
2.3 Incoming goods inspection
Check the contents of the consignment for completeness. Check the contents visually to
determine whether any damage has occurred during transport. If there are grounds for
rejection of the goods, a claim must be iled with the carrier immediately. A Minebea Intec
sales or service organization must also be notiied.
2.4 Before operational startup
NOTICE
Perform visual inspection.
Before operational startup as well as after storage or transport, inspect the product
visually for signs of mechanical damage.
When using electrical operating equipment in systems and ambient conditions with
increased safety requirements, the requirements according to the applicable installation
regulations must be observed.
2.4.1 Danger of explosion
The device may only be used with option Y2 in hazardous areas.Option Y2 is described in
the manual MAN-Combics_CA_models_Option_Y2 (89647-004-70).
2.4.2 Installation
Attention when using commercially available RS-232 connection cables:
RS-232 cables purchased from other manufacturers often have pin assignments that are
not permitted for Minebea Intec devices. Therefore, check the connection diagrams
before connecting and disconnect any cables that have diferent assignments.
Combics 2 Series Complete Scales Models CAW2P, CAW2S 2 Safety instructions
EN-10 Minebea Intec