Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 123 / 224

— MIN.INIT 3.6 - Minimum load for application
— 1 DIGIT 3.6.1 - 1 digit*
— 2 DIGIT 3.6.2 - 2 digits
7.8.4 Reference weight
In order to calculate the length, surface or volume of a given sample, the average weight
of a reference quantity of the sample must be known (in the example below, the reference
is 1 meter of electrical cable). There are diferent ways to enter the reference weight:
- Calculating the reference weight, see chapter 7.8.4.1
- Entering the reference weight, see chapter 7.8.4.2
- Reading the reference piece weight, see chapter 7.8.4.3 .
7.8.4.1 Calculating the reference weight
- Place the reference quantity (deined by the calculation factor) on the connected
weighing platform and calculate the reference sample weight by pressing the
key.
or
- Place any amount of the sample material on the connected weighing platform, enter
the calculation factor through the keypad, and press the
key to calculated
reference sample weight.
How the reference weight is calculated depends on the application setting for resolution
[RESOLUT] (3.9). The value is either rounded of in accordance with the display resolution
[DISP.ACC] (3.9.1) or saved with [10 FOLD] (3.9.2) or [100FOLD] (3.9.3) resolution.
7.8.4.2 Entering the reference weight
The reference weight (e.g., the weight of one meter of electrical cable) can be entered
using the keypad and saved by pressing the
key.
7.8.4.3 Reading the reference piece weight
The reference piece weight can be read using a barcode scanner.
Note:
The entered value remains active until deleted by pressing the key or until
overwritten by a new value. It remains saved after the scale is switched of.
7.8.5 Available Parameter Settings
Description of the parameters:
- Minimum load for application (see chapter 7.8.5.1
- Resolution, see chapter 7.8.5.2
- Decimal Places, see chapter 7.8.5.3
- Parameter for Saving Weight Values, see chapter 7.8.5.4
- Measuring with Two Weighing Platforms, see chapter 7.8.5.5 .
Menu tree of the parameters Neutral measurement nM:
NEUTR.M
7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec EN-121