Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 133 / 224

7.10.1 Exit application, delete parameters
The value of the reference sample weight in the reference memory remains active until it
is deleted via the
key or overwritten or until the application is changed.
The reference sample weight also remains saved after the scale is turned of. You can
assign diferent functions to the
key for deleting applications. When you clear
applications, you can delete either the data stored for all applications or just selected data
stored for the active application.
Setting: [APPLIC.] - [CLER.CF] (3.24) (see chapter
6.1.7 ).
7.10.2 Tare function
If you store a tare (weight value) by pressing the key, you can later enter a tare value
manually. The tare value you enter is added to the stored tare value.
Setting: [APPLIC.] - [TARE.FNC] - [NORMAL] (3.25.1) (factory setting) (see chapter
6.1.8 ).
A tare value entered manually overwrites a stored tare value (weight value). If you enter a
tare value manually, a tare value (weight value) stored later overwrites the manually
entered value.
Setting: [APPLIC.] - [TARE.FNC] - [SPECIAL] (3.25.2) (see chapter
6.1.8 ).
7.10.3 Restore factory default settings
Setting: [APPLIC.] - [RESET] (9.1) (see chapter 6.1.9 ).
7.10.4 Reference percentage value
To determine the weight of a sample relative to a reference weight, you need to deine
the reference percentage value. There are diferent ways to enter this value in the
application:
- Calculating the reference percentage value, see chapter 7.10.4.1
- Entering the reference percentage value, see chapter 7.10.4.2
- Reading the reference percentage value, see chapter 7.10.4.3 .
7.10.4.1 Calculating the reference percentage value
- Place the reference quantity (deined by the reference percentage value) on the
connected weighing platform and press the
key to initialize the application..
or
- Place any amount of the sample material on the connected weighing platform, enter
the reference percentage value through the keypad, and press the
key to
initialize the application.
How the reference weight is calculated depends on the application setting for resolution
[RESOLUT] (3.9). The value is either rounded of in accordance with the display resolution
[DISP.ACC] (3.9.1) or saved with [10 FOLD] (3.9.2) or [100FOLD] (3.9.3) resolution.
7.10.4.2 Entering the reference percentage value
The reference weight for 100% is entered using the keypad and the key is pressed to
initialize the application.
7.10.4.3 Reading the reference percentage value
The reference piece weight can be read using a barcode scanner.
7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec EN-131