— ON
4.7.2 - On (symbol
is displayed)
* Factory setting
7.11.6
Results display as a weight or limit value representation
The result of a measurement is shown either as a weight value or in relation to the target:
- Weight display
:
The measured value line always shows the weight value, even if it lies outside the
tolerance range.
The bar graph is displayed with symbols indicating lower limit, target and upper limit.
Weights are shown logarithmically up to the lower tolerance limit, and linearly
beyond that point.
- Relation to target value
:
As "Weight display" above, with the exception that:
-
[LL] appears in the main display if the weight value is less than the lower limit
-
[HH] is shown on the main display if the weight value is higher than the upper
limit.
7.11.7
Digital Input/Output Interface
The "Checkweighing" application supports the digital input/output-interface.
The four outputs are activated as follows:
-
Lighter > red LED lights
-
Equal > green LED lights
-
Heavier > yellow LED lights
-
Set
The outputs can also be galvanically isolated using option A5.
Acoustic signal: An acoustic signal can be activated in addition to the green LED.
Setting: [SETUP] - [UTILIT.] - [PARAMET] - [SIGNAL] - [ON] (8.2.1) (see chapter
or
).
In the [APPLIC.] - [APPLIC.2] - [CHECK.WG] - [OUTP.ACT] (4.4) "Activation of outputs"
menu, (see chapter
) you can make the following settings for the control outputs:
-
switched of (menu item [OFF] 4.4.1)
-
always on (menu item [ALWAY.ON] 4.4.2)
-
on at stability (menu item [STABIL.] 4.4.3)
-
on within checkweighing range (menu item [CHECK.RG] 4.4.4)
-
on at stability within checkweighing range (menu item [STAB.CHK] 4.4.5)
1. Select menu [APPLIC.] - [APPLIC.2] - [CHECK.WG] with
key and open with
key (see chapter
).
2. To save the setting, press the
key.
3. To exit setup: Press the
key several times.
7 Operating
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-139
Содержание CAW2P
