Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 144 / 224

Note:
If automatic printout of results is enabled, you do not need to press the key.
The results are printed automatically. Printout coniguration, see chapter 7.16 .
Setp + 1.250 kg
Min + 1.240 kg
Max + 1.280 kg
G# + 1.256 kg
T + 0.000 kg
N + 1.256 kg
Lim + 0.48 %
W.Diff+ 0.006 kg
Target
Minimum
Maximum
Gross weight
Tare weight
Net weight
Percentage of deviation from target*
Absolute deviation from target
* When displayed in relation to target value:
- If the weight is lighter than the target, the display shows: LL
- If the weight is heavier than the target, the display shows: HH
7.11.9 Example 2: Checkweighing
Checkweighing samples with a target weight of 1250 g and a tolerance range from –10 g
to +30 g. The tolerance values should be entered as a relative deviation from the target
value.
Coniguration: The "Checkweighing" application is selected using the setting [INPUT] -
[TAR.TOL.] (4.5.4), a printout has been set up (see chapter 7.16 ).
6. Enter upper limit value (in this example, 1280 g).
7. Save the upper limit value with key.
Because the sample with the target weight is still on the weighing platform, the
weight is shown on the display with the checkweighing bars. The green LED
indicates a value in the target range.
8. Remove the sample with the target weight from the platform.
9. The samples can now be placed on the platform and checked one after the other.
The LEDs next to the display indicate the results:
- yellow LED: sample too heavy
- green LED: sample in tolerance range
- red LED: sample too light
10. Print the results with key.
Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating
EN-142 Minebea Intec