Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 97 / 224

— MIN.TARA 3.5 - Minimum load for auto. taring
— 1-DIGIT 3.5.1 - 1 display increment*
— 2-DIGIT 3.5.2 - 2 display increments
— 5-DIGIT 3.5.3 - 5 display increments
— 10-DIG. 3.5.4 - 10 display increments
— 20-DIG. 3.5.5 - 20 display increments
— 50-DIG. 3.5.6 - 50 display increments
— 100-DI. 3.5.7 - 100 display increments
— 200-DI. 3.5.8 - 200 display increments
— 500-DI. 3.5.9 - 500 display increments
— 1000-D 3.5.10 - 1,000 display increments
7 Operating
7.1 Weighing
This application is always available in operation.
Characteristics:
- Zero with key
- Adopt tare weight from the scale with key
- Tare container weight automatically
- Enter tare weight via bar code scanner
- Enter tare weight via 10-key keyboard
- Delete tare values via the numeric input and / and
- Use key to switch the display between:
- 1st and 2nd weight value or display value and minimum initial weight SQmin
- Weighing with two weighing platforms
- Individual identiication of weighing values with numeric identiiers
- Print weight value:
- GMP printout
- Automatic printout
- Automatic data output (see Chapter 8 )
7.1.1 Automatic tare
Menu: [ANWEND.]- [AUT.TARA] (3.7) (see also Chapter 6.1.4 ).
If menu item [EIN] (3.7.2) is active, the irst goods to be weighed that fall below the
speciied minimum load will be adopted into the tare memory on standstill.
The scale returns to the initial status if the scale is loaded with less than 50% of the
minimum load.
7.1.2 Minimum load for automatic tare and for automatic printout
Menu: [ANWEND.]- [MIN.TARA] (3.5) (see also Chapter 6.1.5 ).
For the minimum load, [MIN.TARA] (3.5) can be set:
* Factory setting
7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec EN-95