MIMAKI Kebab MKII, Руководство по эксплуатации

Страница: 51 / 56

Drawing an image from source data
51
To draw the data that perfectly fits the drawing area of the work
If the drawn images are overlapped or have a gap between each other when using the sample work, try the following
so that the images perfectly fit in the work size.
1
Follow the steps 1 to 4 of “Starting
the drawing operation”.
2
Check “Valid” in the [Input of diame-
ter] screen, and directly enter the
diameter of the work you are going
to set.
• The circumference of the work is automatically calcu-
lated once the diameter of the work is entered.
3
Check “Valid” in the [Scale] screen,
and then click “Keep Ratio”.
4
Perform the operation from step 8 of “Starting the drawing opera-
tion” and draw the data.
Check
Check
Input
Check
Check