MIMAKI Kebab MKII, Руководство по эксплуатации

Страница: 50 / 56

Drawing an image from source data
50
8
Check the drawing result.
• When you draw Create Circumference measure Job, scales are printed for the print start position (0.0 mm) as
well as the end position.
• The pitch of the scales for the print end position is 1 mm.
0.0mm 31.42mm
26.42mm
36.42mm
+
-
0.0mm
31.42mm
26.42mm
36.42mm
+
-
0.0mm
31.42mm
26.42mm
36.42mm
+
-
When the diameter
is 10 mm
Set the circumference of the draw-
ing data to “31.42 mm”, as it is
where the print start position (0.0
mm) is. Set the circumference of the
drawing data to “32.42mm”, as
the print start position (0.0 mm) is
located at 31.42 +1. Set the circumference of the
drawing data to “30.42mm”, as
the print start position (0.0 mm)
is located at 31.42 -1.
The circumference calculated based
on the diameter of the work.