MIMAKI Kebab MKII, Руководство по эксплуатации

Страница: 48 / 56

Drawing an image from source data
48
Use the job for adjusting the print size (Create Circumference measure Job), and
check the actual print size.
If it is difficult to know the print size with the actual print data, use the job for adjusting the print size (Create Circum-
ference measure Job) instead.
When you use Create Circumference measure Job, the work is printed as
shown in the illustration on the right.
1
Follow the steps 1 to 4 of “Starting
the drawing operation”.
2
Select the spool job, and click the
(Kebab Jig Print) icon.
3
Check “Kebab Edit”, and then click
the
(Create Circumference mea-
sure job.) icon.
• The Create Circumference measure Job dialogue is dis-
played.
+
36.42mm
31.42mm
26.42mm
0.0mm
-
Click
Click
Check
Click