MIMAKI JV400-130SUV, Руководство по эксплуатации

Страница: 50 / 194

2-20
Set the media feeding
Correct the feeding rate of media.
If the correction value is not appropriate, stripes may appear on the printed image, thus resulting in a poor
printing.
Setting Feed Correction
A pattern for media correction is printed and a media-feeding rate is corrected.
1
Set a media. ( P.2-5)
2
Press the key in LOCAL.
3
Press the key.
4
Press the key to print a correction pattern.
5
Check the correction pattern and enter a correction
value.
Enter a correction value in "+" : The boundary between the two bands is widened.
Enter a correction value in "-" : The boundary between the two bands is narrowed.
• When you have changed the media type, check the pattern and perform adjustment depending on the status.
• When you have changed the temperature of the heaters, make sure that the [CONSTANT] lamp lights
up and that the preset temperature is reached, and then start the correction.
•
When using a roll medium, rewind the medium by hand before printing so that it is not loose.
When the roll medium has not been rewound tightly, it may cause image quality to
deteriorate.
• When printing with a take-up device, set the media first and then perform media correction.
• Two bands are printed in the correction pattern.
• Make adjustment so that an even color density is obtained in the boundary between the two bands.
Second band
First band
Media advance direction
F EED COMP .
< ENT >
F EED COMP .
PR I NT
[ ENT ]
* * PR I NT I NG * *
P L EASE WA I T
F EED COMP .
=
0
When entering the value in “+” 0 When entering the value in “-”
Entry example:
When one pattern is away from
the other
Entry example: When the
patterns overlap