MIMAKI JV400-130SUV, Руководство по эксплуатации

Страница: 161 / 194

Warning / Error Messages
5-19
1
1
1
1
5
T
roubleshooting
SYSTEM HALT
Message Cause Solution
The number of mounted heads is “0”.
• Turn off the main power to the machine and
turn it on after a while.
If the same error message appears again,
contact your local distributor to call for ser-
vice.
The media width or the media length
required for printing is not enough.
• Change the media to the one with enough
width or length.
• When the media width narrows because
the origin moved, slide the origin to the right
to widen the effective media width.
The parameter has an error.
• Turn off the main power to the machine and
turn it on after a while.
• If the same error message appears again,
contact your local distributor to call for ser-
vice.
Message Solution
Turn off the main power to the machine and turn it on after a while.
If the same error message appears again, check the number and contact your local dis-
tributor to call for service. (“000” is the error No.)
E RROR 9 0 d
NO H E A D S E L E C T
E RROR 9 0 f
P R I N T A R E A S HOR T
E RROR 0 4
P A R AM ROM
S Y S T EM H A L T
0 0 0 : ME S S AGE