MIMAKI JV400-130SUV, Руководство по эксплуатации

Страница: 134 / 194

4-34
Replacing consumables
Replacing the wiper
The wiper is consumable.When the display indicates that it is necessary to
replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
Press the key in LOCAL.
2
Press the key.
• The carriage moves to the maintenance position.
3
Open the rght maintenance cover then remove the
wiper.
• Pull out the wiper by holding the protrusions at its both ends.
4
Insert a new wiper.
• Insert a new wiper by holding its both ends.
5
Close the right maintenance cover then press the
key.
• After its initial operation, the machine returns to LOCAL.
• A cleaning wiper is an option.Buy one through the dealer in your region or at our service office.
• When you replace it before the message is displayed, first perform carriage out and then replace it.
( P.4-6Steps 1 to 2)
After replacing, reset the counter for the number of times the wiper was used. ( P.3-39)
• Until the replacement work is completed, [COMPLETED: ent] is displayed on the screen.
After the work up to the Step 4 is completed and you close the right maintenance cover,
press the
key.
< LOCA L >
R e p l a c e a WI PER
[ M N T ]
REP L ACE WI PER
EXECUT E
[ ENT ]
MAINT.
REP L ACE WI PER
COMP L E T ED
[ ENT ]
Projection
Projection
C l o s e a c o v e r
* B e i n g I n i t i a l i z e d *
P L EASE WA I T