MIMAKI JV33-130, Руководство по эксплуатации

Страница: 80 / 202

3-16
Setting WhiteLay Print
When using SS21 white ink, you can print with other colors after printing with white ink, without returning the
media.
In this page, set the printing method of white ink and other color ink.
1
Perform operations up to P.3-12 the
step 5.
2
Select [WhiteLay Prt] by pressing the
keys.
3
Press the key.
4
Select set value by pressing the
keys.
• Set value : OFF, ON (LEVEL 1 ~ 3)
Set Value Outline
OFF Printing the white ink and the color ink at the same time.
ON (LEVEL1~3
*1
)
*1. This machine cannot set the order of synthesis.
Printing the color ink on the white ink after printing with the white ink.
• If a larger number is set for LEVEL 1 to 3, time interval between
printing with white ink and printing with color ink becomes long.
• If a large number is set for LEVEL, drying property of white ink
goes up, but printing time becomes long.
• This function can be set only when SS21 ink (6 white) is filled.
• Printing time is about two times longer than normal printing.
• When printing on the following condition, as usable number of nozzles is limited, printing
speed slows.
Setting of printing
quality
Resolution Printing width
DRAFT 540 x 1080 dpi 1541 mm or above
FINE
720 x 1080 dpi
1155 mm or above
720 x 1440 dpi
1440 x 1440 dpi 1155 mm or above (577mm for Vd data)
[ 1 ] P R I N T MOD E
DR A F T QU A L I T Y < e n t >
[ 1 ] P R I N T MOD E
Wh i t e L a y P r t < e n t >
[ 1 ] Wh i t e L a y P r t
S E L . : O F F
[ 1 ] Wh i t e L a y P r t
S E L . : ON ( L E V E L 3 )