manualshive.com logo in svg

MIMAKI JV33-130, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI JV33-130 Скачать руководство пользователя страница 20

1-4

Names of Parts and Functions

Front

Front cover

Open the cover in setting of medias, taking of measures
against jamming of medias or in maintenance inside the
station. 
Even when the power switch is off, keep this cover and
the other covers closed.

Carriage

Moves the print head unit from side to side.

Operation panel

This panel has the operation keys required for
operating the machine and the LCDs for displaying
setting items, etc.

Clamp lever (front)

Moves the pinch rollers up and down to hold or
release the media.

Power switch

*1

Turns on/off the power to the machine.

Waste ink tank

Waste ink gathers in this tank.

Stand

Supports the main body of the machine. It is pro-
vided with casters that are used to move this
machine.

Take-up device (Except Type B)

Automatically winds up the roll media
printed.

Maintenance cover

Open the cover in maintenance.
Even when the power switch is off, keep
all covers closed.

Platen

The printed media is sent out, sliding on the platen.
Three heaters are installed inside the platen.

Print heater/ Post-heater

Fixes and dries the ink on the currently produced
print. (Located inside the platen)

Ink cartridges

Each cartridge contains an ink of a
particular color.

Cartridge protection cover

This prevents an injury or breakage 
of the machine due to a protrusion of 
the 440 cc cartridge.
(It is located under the ink cartridge.)

*1: The power switch under the operation panel lights in green when the power is turned on, and blinks when the

power switch is turned off. The ink clogging prevention function is periodically operated even when the power
switch is OFF if the main power switch keeps being ON. (Sleep function) 

P.1-5

Содержание JV33-130











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды