Mikrotron eosens TS3 Скачать руководство пользователя страница 97

Страница: 97 / 120

TS3 User Manual

page 88

Appendix H: TS3 Updates

From time

o time the

e will be camera soft

are updates. These updates will come in the form of

files

that are made available via FTP or some other means.

If you are notified by MIKROTRON or one of its

distributors that an update is available, they will let

you know where the file is located and how to

download it to a PC running Windows Vista or

Windows 7. The PC will need to have a an SD Card

port or have a card reader attached to it.
Update Procedure:
1. Navigate to System/Information/S

atus to see the

current Soft

are Version of your TS3.

2. Power down the TS3.
3. Download the update file

o a Windows PC.

The

update file name will be in the

orm of

“ts3_revx.x.x_<Year>_<date>.exe.” For example,

the latest revision as of the 1st of March, 2012 is:

ts3_rev1.1.4_2012_0301.exe.

4. A

ach an SDHC card to the PC. If the PC does not

have a built in card reader, you may a

ach a USB

card reader to it.

Please note the drive letter the

PC assigns the card

Note: There are two options

or formatting the SD

d using System/Storage/Format: “Compatibilit

” (FAT32), and “Performance” (EXT2). In order to be

used for the update process the SD Card must be

forma

ed using the “Compatibilit

” (FAT32) option.

5. Double click on the update file. The Upd

te Screen

will appear. Click Next.

6. A License Agreement will appear. Click the check

box to accept the terms and click Next.

7. A screen will appear for selecting the SD Ca

Make sure that you have selected the correct

drive letter before clicking on Install.

A new

window with a progress bar will appear.

8. Once the update program has finished writing

the SD Card, a final sc

een will appear. Click

Finish. Remove the SD Card from the PC.

9. Insert the SD Card into the SDHC slot of the TS3.
10. Power up the TS3 while pressing the Up Arrow on

The D-Pad. When the camera boots up, you will

see a blue update screen and a progress bar. When

it is finished the

amera will boot normally.

11. A

er the camera boots up, navigate to System/Configu

ation and select

eset. This will load valid

factory default parameters into the camera.

12. Power Cycle the camera (turn it completely o

, then reboot.)

13. Navigate again to System/Information/S

atus to see the new Soft

are Version of your TS3.

14. Re-format the SD Card before using it for image file

torage.

Figure 9-7: Camera Update Screens

Table 9-6:

Information Status

Содержание eosens TS3

























































































































Результаты поиска

Содержание eosens TS3

Отзывы:

Mikrotron eosens TS3, Руководство пользователя, Страница: 97 / 120

Результаты поиска

Содержание eosens TS3

Отзывы: