Mikrotron eosens TS3, Руководство пользователя, Страница: 27 / 120

page 18
To open the Networked TS3 in a Windows Explorer menu:
1. Open either a web browser or Windows Explorer.
2. Type the camera name or IP address in the Location bar, preceded by \\. So, using the same
information as in the example above, type in either \\192.168.1.106, or \\mikrotron_ts3.
When the camera is viewed in Explorer, you will see the camera name or IP address under Network.
Opening that, you will see a directory called “media,” which contains directories for each mass
storage device installed on the camera. (See “Table 2-5: TS3 Mass Storage Functionalit y ” on page
12.)
3-6 TS3 Name the Camera
Camera Name
When the TS3 leaves the factory its default
name is TS3-xxx. For example, looking at
“Figure 3-11: Camera Name Menu” the
camera used for the screen shot was TS3-
17. The camera name can be used both for
identi fic ation on a n e twork and as part of
the filename when s a ving images.
It may be beneficial t o rename the camera
according to its function, lo y ality, field of
vi e w, etc. depending on how the camera is to
be deployed.
To change the camera name:
1. Navigate to the System Menu.
2. Select “Name.”
3. Move the cursor to the box showing the current name and click “OK” to open the alpha-numeric dialog where you
will enter the new camera name. If enabled, you can do this using the Touchscreen. If not you will use the D-Pad.
4. Delete the present camera name using the Backspace bu tt on in the dialog box, then enter the new name in its place.
Figure 3-10: TS3 in Windows Explorer
Figure 3-11: Camera Name Menu
T3 User Manual