Mikrotron eosens TS3, Руководство пользователя, Страница: 65 / 120

page 56
Display Rate for live images:
The display rate for live images in Fas
M
otion m a y be adjusted using
the spinner at the top of the Image Window. (See Figure 7-12 on page
55.) This number will automati c ally change according to the
performance of the network and the PC.
There is also a pause/play bu
tt on on the top of the Image Window.
This may be used to temporarily start and stop the video stream.
Setting up the HDMI display:
The TS3 has an HDMI output that can be used for displaying both live
and recorded images. The HDMI port is located on the side of the camera
between the Power and External I/O connectors. See “Figure 1-4: TS3
Side View (Door open)” on page 5.
To enable the HDMI output click on the HDMI bu
tt on on the
Display Settings T ab and select the resolution y ou wish to use.
Note: The images from the camera will be scaled to fit the HDMI
displ a y screen while maintaining aspect ratio. This means th a t there
may be black borders on the sides or top and bo tt om of images,
depending on aspect ratio and be s t fit
7-5 Name the Camera
When the TS3 leaves the factory its default name is TS3-xx, “xx” being
the camera’s serial number. The camera name can be used both for
identi fic ation on a n e twork and as part of the filename when s a ving images.
It may be beneficial t o rename the camera according to its function, lo c ality, field of vi e w,
etc. depending on how the camera is to be deployed.
To change the camera name simply edit the name as it appears in the box above the image window.
There are some limitations in the cha
r acter set that may be used for the camera name as it
must be “legal” both as a filename and n e twork device name. All numbers, and upper- and
lower-case numbers may be used. The only punctuation cha r acter that may be used is the
“-” (not “_”).
7-6 Camera Time and Date
When your TS3 is shipped, the time
and date will need to be set to reflect
your local time
Access the Time and Date
Configu r ation dialog f r om the
camera menu in Fas
M
otion
Once this is set, a rechargeable
ba tt ery inside the TS3 will
maintain the correct time.
If your TS3 is not powered up for
a few weeks, the time and d a te
may need to be reset.
Figure 7-13: HDMI Settings
Figure 7-14: Time and Date Configuration