Mikrotron eosens TS3, Руководство пользователя, Страница: 30 / 120

11S-3000M
page 21
6. Double click on any item and a File Action dialog will open th a t will allow
you to Copy or Move the item to another storage device on the system, or
delete it.
7. When done, use the Menu or Back bu tt on to navigate away.
Eject , also on the Storage Menu , should be used whenever you wish to remove
media from the TS3.
NOTE: Failure to eject SDCards or USB devices before removal may result in
incomplete transfers.
The
Format function on the S t orage Menu should be used with some caution as
formatting an y media will remove any data on it.
3-9 Configuration and Camera Information
TS3 Configurations , which include all Network, Time, and all camera settings
can be Saved, Reloaded, or Reset to factory defaults.
1. From the System Menu, navigate to Configu
r ation
2. Select
Save
to save the current configu r ation. The c onfigu r ation m a y be saved as Configu r ation
# or Configu r ation #2
3. Select Load to load a saved Configu r ation (Co n figu r ation #1, or #2
4. Select Reset to load the factory default configu r ation
General information about the c amera, including MAC address and versions of soft w are,
FPGA, Sensor and Gig-E are available in Information in the s ystem Menu.
3-10 Reset
There are two levels of Reset available on the TS3, ‘ Soft Reset ,’ and ‘ Hard Reset .’
The ‘
Soft Reset
’ is similar to a PC reset or warm boot. It does not change any settings or po wer
the system down, it simply restarts the user interface and clears out any error conditions. All user
configu r ations and all ima g e data are preserved.
The ‘ Hard Reset ’ resets the camera configu r ation back o f its factory settings. This elimi na tes the
current user settings as ell as any saved configu r ations (Co fig 1 and Co fig 2) and e r ases any image
data in the camera. For these reasons, the Hard Reset is very seldom done. There may be instances
when you will directed to do a Hard Reset a er performing an update or maintenance task, but it is
not done routinel .
Figure 3-17: File Action Dialog
T3 User Manual