Mikrotron eosens TS3, Руководство пользователя, Страница: 37 / 120

page 28
To begin Recording, Press the Arm Button .
When the Arm Bu tt on is pressed the camera begins recording into its circular bu ff er. The Camera
LED will change from Green (LIve) to slowly flashing Amb e r. It will record for an indefini t e period of
tim e until it s ets a Trigger. (See ”4-5 Configuring th e Trigger” on page 26.)
If the Arm Bu tt on is pressed a second tim e , the Recording will abort. A courtesy
message will appear asking for confirm a tion. Y ou will need to use the OK
Bu tt on on the D-Pad to accept.
The recording state is indicated by a progress bar at the bo tt om of the TS3 LCD display.
(See “Figure 4-9: Progress: Armed TS3”.) For this example, a 50% Trigger Point has been
selected. The yellow/green bar represents the record bu ff er. The yellow half represents
the pre-trigger portion the green represents the post-
trigger portion. Th e “T” in the center of the bar represents the Trigger Point (frame “0”).
The numbers above and below the bar on each side indicate the number of frames and seconds for
the pre-trigger portion to the left, and the po s t-trigger portion to the right. In this instance,
because the Trigger Point is set at 50%, both the number of frames and amount of time is the sam e
on both ends.
Note: If the TS3 is triggered before the pre-trigger portion of th
e bu ff er is full, it will immediately
cease taking pre-trigger frames, record frame “0” and progress to the post-trigger portion of th
recording. When complete, the recording will have contiguous f r ames, with the full complement
of post -trigger frames, but fewer pre-trigger frames. (See “4-5 Configuring th e Trigger” on page
26.)
The recording has just been started (the Arm Bu tt on has just been pushed). The green progress
line spans the whole distance between the left ed g e and the trigger point.
The recording has progressed through a little mo r e than half of the pre-trigger portion. The
mar k er has moved and the yellow line has proceeded with the progress of the recording.
All of the pre-trigger frames have been recorded. The TS3 is continuing t o record new frames as it
Figure 4-9: Progress: Armed TS3
-09.796
[CAP] ROI:1280x 1024 FPS:250 EXP: 8X (0.500 ms) TrigPos: 50%
discards the oldest. It can remain in this state indefini t ely waiting f or a Trigger .
-2449
+2449
+09.796
Batt: 53%
-2449
-09.796
[CAP] ROI:1280x 1024 FPS:250 EXP: 8X (0.500 ms) TrigPos: 50%
T
+2449
+09.796
Batt: 53%
-2449
-09.796
[CAP] ROI:1280x 1024 FPS:250 EXP: 8X (0.500 ms) TrigPos: 50%
T
+2449
+09.796
Batt: 53%
Figure 4-8: Camera LED
T3 User Manual
11S-3000M