Mikrotron eosens TS3, Руководство пользователя, Страница: 17 / 120

page 8
*The 17.5mm diagonal @ 1024 x 1024 is slightly larger than the 16mm specifi c ation or 1” C-mount
lenses. Many, but not all 1” format lenses will sati s factorily cover this resolution
This table assumes that the images are centered (no custom o ff set applied). (See “Table
9-3: Resolutions, R a tes, and Times” on page 79.)
Note: All F-mount lenses will easily cover the full 22.9m full resolution ima g e plane.
2-3 Powering Up, Charging, and Power Down
The camera can be powered by its rechargeable 3.7V Li-Ion ba tt ery or the external 12V power supply.
Both are included with the camera. The ba tt ery is fully charged at the factory and is shipped outside the
camera to avoid accidental discharge. The ba tt ery door is located on the underside of the camera.
The Li-Ion ba tt ery will power the TS3 for up to several hours, depending on configu r ation and mode of
operation
NOTE: When a new ba
tt ery is installed, it must go through one complete discharge/recharge cycle to
Resolution Sensor Diagonal Required Lens Format
to avoid noticeable
Vignetting
Field of View From 10M with
50mm Lens
1280 x 1024 22.9mm 1.3” 3.6 x 2.9M
1024 x 1024 17.5mm 1.3”* 2.9 x 2.9M
800 x 600 14mm 1” 2.2 x 1.7M
640 x 480 11.2mm 2/3” 1.8 x 1.3M
256 x 200 4.5mm 1/3” .72 x .56M
Figure 2-1: Battery Access Door
Table 2-2: Lens Selection
T3 User Manual