Mikrotron eosens TS3, Руководство пользователя, Страница: 52 / 120

11S-3000M
page 43
6-2 Camera Tab
Clicking on the Camera Tab exposes its
contents and shifts the other
T abs down
the Tabs Pane below it.
All tabs are always accessible, with the
exception of the
r eview tab, which is only
available in Review Mode (a ft er video has
been captured). Clicking on the Camera Tab
a second time closes it. Opening another
tab will also close the current one.
The Camera Tab always displays the
Camera’s current Mode of operation
These modes include:
• Camera Live View, in which a live image
is displayed in the Image Area.
• Camera Armed. This is the state of
capturing pre-trigger frames.
• Camera Triggered. The camera is
capturing post-trigger frames.
• Camera Video Review. The camera
has finished ecording. The captured
video appears on the screen. Playback
controls appear beneath the image window. (See “Web-App Review and Save” on page 48.)
You will also notice th a t when the camera is controlled via the Web App, the Mode script will say,
“Waiting or Camera to Arm” or Waiting or camera Trigger,” etc. for a very short time u n til the
app gets confirm a tion back f r om the camera that its Figure 6-4: Network Con f iguration Dialog
state has changed.
If the computer loses communication with the
camera, the Mode script will say “Camera Load
Failure.”
To change the camera name: highlight the
camera name in the Edit Box and type in the
new name. Press “tab” to accept.
The Camera Con iguration may be loaded
or saved via the Configu r ation Dialog. It m a y
be reset using The “Reset to Factory
Default...” bu
tt on.
The Network Con iguration of the camera may
be viewed by clicking on the “Network Information”
bu
tt on.
Figure 6-3: Camera Tab
T3 User Manual