Mikrotron eosens TS3, Руководство пользователя, Страница: 24 / 120

11S-3000M
page 15
3-3 Controlling the Displays
Setting Defualt Gamma in User Preferences:
User Preferences is in the System/Configu r ation menu.
The Default Gamma settin g is used both to set the
defualt output Gamma for displayed and saved images,
and to set the Gamma for the LCD display. Gamma of 1.0
(linear) is recommended unless you intend to encode
your images with 2.2 Gamma.
LCD and HDMI setup in the Display Menu:
There are three menu elements in the Display menu that
control the behavior of the displays. These are:
• LCD Adjust
• LCD Dimmer
• HDMI
The Image Adjust dialog opens when you click on the Edit
bu tt on in the Image Adjust menu. The controls here adjust
only the way images are displayed on the LCD. They do not
change the images in camera memory or
images that are or will be saved.
For any of the three controls here, LCD Brightness, LCD
Contrast, and LCD Backlight, changes may be made either
by clicking on the + and - boxes, which will change the
associated item up or down in increments of 1, or you
can click on the edit box itself to open a keypad. See
“Figure 3-12: Keypad Dialog Boxes” on page 19.
LCD Brightness and Contrast have a range between -100
and 100 with a default value of 0. LCD Backlight has a
range between 0 and 100 with a default value of 100.
Note: The Image Adjust, White Balance, and RGB Gain
elements do
not
control the LCD display. These are part
of the image processing pipeline that directly influence
the saved image. (See “Image Pipeline” on page 32.)
The LCD Dimmer is a timer th
a t turns the LCD display off
a ft er a number of minutes. There are four choices:
• O --the display will not “time out ”
• 1 Min. The display will go dark a
ft er 1 minutes of
non-use.
• 5 Min. The display will go dark a ft er 5 minutes of
non-use.
• 10 Min. The display will go dark a ft er 10 minutes of
non-use.
Figure 3-4: LCD Display Controls
Figure 3-5: HDMI Controls
HDMI Display
While the 7” WVGA 800 x 480 display on the TS3 is
perfectly adequate for setting im
ag e captures and
even reviewing video, watching the same video on
a large fl
a t panel display makes sharing the imagery
with others much easier. With the TS3 there is no
need to download images to a PC to view them on a
large display. Use a standard HDMI cable to
connect the TS3 to an HDMI compatible displ
a y.
The HDMI output control is also accessed in the
Display menu. The HDMI output can be Enabled
and Disabled here and the resolution 640 x 480,
720p, or 1080p may be selected. (Any resolution not
supported by a display a tt ached to the TS3 will be
Grayed out and the bu tt on not selectable. )
T3 User Manual