MicroNet SP5563A, Руководство пользователя

Страница: 65 / 132

65
NOTE: Normally the setting range of the <Pre-trigger buffer>
is 1 to 20. However, the setting range will change accordingly
if the frame rate of MJPEG on the <Video Frame Rate>
setting page is 6 or smaller.
NOTE: Make sure SMTP configuration has been completed.
Refer to the Mail section of this chapter for further details.
File Name
Enter a file name in the blank, ex. image.jpg. The uploaded image’s file
name format can be set in this section. Please select the one that meets the
requirements.
Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
Add sequence number suffix up to # and then start over
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number being set. For example, if the
setting is up to “10”, the file name will start from 00, end at 10, and then
start all over again.
Overwrite
The original image in the FTP site will be overwritten by the new
uploaded file with a static filename.
Save
Click on <Save> to save all the settings mentioned above.
7.3.8.6 Manual Trigger
The Manual Trigger setting can be found under this path: System>
Events> Manual Trigger .
With Manual Trigger setting, the current image(s) or video can be upload
to the appointed destination, such as an FTP site or and E-mail address.