MicroNet SP5563A, Руководство пользователя

Страница: 35 / 132

35
General
Enable IP Filter
Check the box to enable the IP Filter function. Once enabled, the
listed IP addresses (IPv4) will be allowed/ denied access to the IP
Camera.
Select “Allow” or “Deny” from the drop-down list and click the
<Apply> button to determine the IP Filter behavior.
Add/ Delete IP Address
Input the IP address and click the <Add> button to add a new filtered
address.
The Filtered IP Addresses list box shows the currently configured IP
addresses. Up to 256 IP address entries may be specified.
To remove an IP address from the list, please select the IP and then
click the <Delete> button.
7.3.2.4 IEEE 802.1X
The IP Camera is allowed to access a network protected by 802.1X/EAPOL
(Extensible Authentication Protocol over LAN).
Users need to contact with the network administrator for gaining certificates,
user IDs and passwords.
CA Certificate
The CA certificate is created by the Certification Authority for the purpose of
validating itself. Upload the certificate for checking the server’s identity.
Client Certificate/ Private Key
Upload the Client Certificate and Private Key for authenticating the IP
Camera itself.