MicroNet SP5563A, Руководство пользователя

Страница: 58 / 132

58
Refer to section Mail for further details.

Send HTTP notification
Check this item, select the destination HTTP address, and specify
the parameters for event notifications by <Motion Detection>
triggered. When an alarm is triggered, the notification can be sent
to the specified HTTP server.
For instance, if the custom parameter is set as “ action=1&group=2 ”,
and the HTTP server name is “ http://192.168.0.1/admin.php ”, the
notification will be sent to HTTP server as
“ http://192.168.0.1/admin.php? action=1&group=2 ” when alarm is
triggered.

Record Video Clip
Check this item and select a video recording storage type, <SD
Card> or <NAS> (Network-Attached Storage>. The Motion
Detection recording will be stored in microSD / SDHC card or the
NAS when motion is detected.
Pre-trigger buffer recording function allows users to check what
happened to cause the trigger. The pre-trigger buffer time range is
from 1 sec. to 3 sec. Select <Upload for sec> to set the
recording duration after motion is triggered. The setting range is
from 1 sec. to 99999 sec. Select <Upload during the trigger active>
to record the triggered video until the trigger is off.
NOTE: Please make sure the local recording (with microSD
/ SDHC card) or the remote recording (with NAS) is
activated so that this function can be implemented. Refer to
section Recording for further details.
File name
Enter a file name in the blank, ex. image.jpg. The uploaded image’s file
name format can be set in this section. Please select the one that meets
the requirements.
Save
Please click on the <Save> button to save all the Motion Detection settings
mentioned above.