Microcom 360C, Руководство оператора

Страница: 46 / 297

45
3
Press «
∧
» button or «
∨
» button on the operator panel to display
[NETWORK SETTING], and then press the «OK» button.
4
Press «OK» button when [IP ADDRESS SET] is displayed.
5
Press «
∧
» button or «
∨
» button on the operator panel to select [AUTO] or
[MANUAL]. If [MANUAL] is selected, manually input the IPv4 Address, Subnet Mask
and Gateway Address.
Directly Connecting to the Machine (AP Mode)
Automatic Setup (Push Button)
If the wireless terminal (computer, tablet, smartphone, etc.) supports «WPS-PBC»
(push button), then you can use the WPS button to connect via wireless (AP mode).
Follow the procedure below to connect.
1
Confirm the position of the WPS button in the user's manual provided with the
wireless terminal (computer, tablet, smartphone, etc.).
2
Turn on the printer.
3
When [SETUP WIRELESS?] appears, select [NO].
4
Press «
∧
» button or «
∨
» button on the operator panel to display [WIRELESS
(AP MODE) SETTING], and then press the «OK» button.
5
Enter the Admin password, and then press the «OK» button.
·
The default password is 999999.
6
Select [ENABLE], and then press the «OK» button.
7
Press «
∧
» button or «
∨
» button on the operator panel to display
[AUTOMATIC SETUP (PUSHBUTTON)], and then press the «OK» button.
8
Select YES, and then press the «OK» button.
9
Start WPS-PBC (push button) on the wireless terminal (computer, tablet,
smartphone, etc.).
10
Once the setup completion screen is displayed, it indicates that the wireless LAN setup has
completed.