Microcom 360C Скачать руководство пользователя страница 224

Страница: 224 / 297

223

Machine Problems

The Machine Does Not Operate

Cause

Remedy

Reference

The power cord is not inserted

properly.

Insert the power cord fully.

Turning On the Machine

This machine is not turned on.

Turn the machine on.

Turning On the Machine

Nothing Is Displayed on the Screen when the Power Is Turned On

Cause

Remedy

Reference

The power cord is disconnected.

Insert the power cord fully.

Turning On the Machine

A power failure has occurred.

Check whether power is supplied to

the outlet.

Printing Does Not Start

Cause

Remedy

Reference

An error is displayed.

Check the error messages and follow

the on-screen instructions.

List of Messages

The LAN cable/USB cable is not

inserted.

Insert the LAN cable/USB cable fully.

Using the Machine

There is a problem with the LAN

cable/USB cable.

Use another LAN cable/USB cable.

The LAN cable/USB cable does

not match the required standard.

• Use a cable that conforms to the

USB 2.0 standard.

• Use a cable that conforms to the

Ethernet 10BASE-T/100BASE-TX

standard.

There may be a problem with the

Execute [PRINT INFO] >

Printing and Checking a

print function.

[CONFIGURATION] on the operation

Report

panel to print the settings, and check

the print performance.

The communication protocol is

Select [ADMIN SETUP] >

disabled.

[NETWORK SETUP] in the menu,

and enable the communication

protocol that is used.

The printer driver is not selected.

Set the printer driver as the default

printer.

The output port of the printer

driver is incorrect.

Specify the output port where the

LAN cable/USB cable is connected.

Содержание 360C










































































































































































































































































































Результаты поиска

Содержание 360C

Отзывы:

Бренды по названию

Популярные бренды

Microcom 360C, Руководство оператора

Результаты поиска

Содержание 360C

Отзывы:

Бренды по названию

Популярные бренды