Microcom 360C, Руководство оператора

Страница: 102 / 297

101
Setting Paper Information on the Operation Panel
Use the operation panel to set the information for the paper to use to the machine.
Set the information in the following order: paper format
→ paper size → paper weight → cut type
→ cut
position
·
Paper Format
For roll paper or continuous paper folded along a perforation, set [CONTINUOUS
PAPER]. For paper cut into rectangles, set [CUT PAPER].
1
Confirm that [READY TO PRINT] is displayed on the machine.
2
Press «
∧
» button or «
∨
» button several times to display [MENUS], and press
«OK» button.
3
Press «
∧
» button or «
∨
» button to display [FEEDER CONFIG], and press
«OK» button.
4
Press «
∧
» button or «
∨
» button to display [PAPER FORM], and press «OK» button.
5
With the setting flashing, press «
∧
» button or «
∨
» button to display the value
you want to set, and press «OK» button.
6
Confirm that the setting stops flashing and "*" is displayed to the right of the value
you want to set.
·
Paper Size
You can set 25.0 mm to 86.0 mm (1.00 inches to 3.40 inches) for the width and 3.0 mm to 551 mm
(2.10 inches to 21.70 inches) for the length.
7
Press «
∨
» button once to display [X DIMENSION], and press «OK» button.
8
With the setting flashing, press «
∧
» button or «
∨
» button to display the value
you want to set, and press «OK» button.
9
Confirm that the setting stops flashing and "*" is displayed to the right of the value
you want to set.
10
Press «
∨
» button once to display [Y DIMENSION], and press «OK» button.
11
With the setting flashing, press «
∧
» button or «
∨
» button to display the value you want to
set, and press «OK» button.
12
Confirm that the setting stops flashing and "*" is displayed to the right of the value you
want to set.