Microcom 360C Скачать руководство пользователя страница 40

Страница: 40 / 297

• Be sure to turn off the machine before connecting and disconnecting the power cord and the ground

wire.

• Be sure to connect the ground wire to the designated ground terminal.

• If the machine cannot be grounded, contact your dealer.

• Be sure not to connect the ground wire to a water pipe, a gas pipe, the ground terminal of a telephone

line, or a lightning rod.

• Be sure to connect the ground wire before connecting the power cord to the outlet.

Also, be sure to unplug the power cord from the outlet before disconnecting the ground wire.

• Be sure to hold the power plug when plugging in or unplugging the power cord.

• Be sure to insert the power cord fully into the power outlet.

• Do not plug in or unplug the power cord with wet hands.

• Install the power cord in a location where users cannot step on it, and do not place any object on the

power cord.

• Do not bundle or tie the power cord.

• Do not use a damaged power cord.

• Do not overload the outlet.

• Do not connect the power cords of this machine and other electric products to the same outlet. If the

power cord of this machine is connected to the same outlet as other electric products, especially an

air conditioner, copier, or shredder, this machine may malfunction due to electrical noise. If you have

to connect the power cord of this machine to the same outlet as other products, use a commercially

available noise filter or noise cut transformer.

• Use the power cord included in this machine, and plug the cord directly into the outlet. Do not use the

power cords of other products for this machine.

• Do not use an extension cord. If you have to use an extension cord, use a cord rated 10A or higher.

• If you use an extension cord, this machine may not work properly due to AC voltage drop.

• Do not turn off this machine or unplug the power cord while printing.

• If you do not use this machine for an extended period of time at occasions such as holidays or trips,

unplug the power cord from the outlet.

• Do not use the power cord included in this machine for other products.

Содержание 360C










































































































































































































































































































Результаты поиска

Содержание 360C

Отзывы:

Бренды по названию

Популярные бренды

Microcom 360C, Руководство оператора

Результаты поиска

Содержание 360C

Отзывы:

Бренды по названию

Популярные бренды