Microcom 360C Скачать руководство пользователя страница 205

Страница: 205 / 297

204

Message

Description

□

IMAGE DRUM NOT RECOMMENDED

A suitable image drum unit is not installed in the

machine.

□

IMAGE DRUM LIFE

The image drum unit has reached the end of its

lifetime, and printing will stop soon. Prepare a new

image drum unit.

□

FILE SYSTEM IS FULL

The internal file system of the machine is full.

□

FILE IS WRITE PROTECTED

The machine is trying to write to a file in the internal

file system of the machine that does not allow writing.

PLEASE DETACH IT

USB HUB UNSUPPORTED

The machine is connected to an unsupported USB

hub. Remove the hub.

PLEASE DETACH IT

UNSUPPORTED USB DEVICE DETECTED

The machine is connected to an unsupported USB

device. Remove the USB device.

PLEASE DETACH IT

UNRECOGNIZED USB DEVICE

The USB device connected to the device was not

recognized correctly. Remove the USB device.

□

SNTP SERVER COMMUNICATION ERROR

Failed to retrieve the time from the SNTP server.

Check the network settings.

□

FILE OPERATION FAILED [FS_ERR]

An error occurred in the internal file system of the

machine. Operations that do not use the file system

can be performed.

The error is cleared when the following print data is

received.

PRESS OK BUTTON

INVALID DATA

Invalid data was received.

Press «OK» button to clear the error.

CHANGE IPV4 ADDRESS

IPV4 ADDRESS IS CONFLICTED

The IPv4 address is the same as another device.

Check the IPv4 address.

PAPER DETECTION ERROR

[ERRCODE]:ERROR [SUBCODE]

The paper sensor could not detect the paper

correctly.

Check the position, cleanliness, and settings of the

paper sensor.

The meaning of [SUBCODE] is indicated below.

0 to 6: An error has occurred in the bottom sensor.

11 to 15: An error has occurred in the top sensor.

21 to 26: An error has occurred in the translucent

sensor.

CHANGE [MEDIA_SIZE] [MEDIA_TYPE]

PRESS OK BUTTON

The paper type of the paper loaded in the machine

does not match the print data. Load the correct paper

to the machine. Press «OK» button when loading of

the paper is complete.

RESTART PRINT?

OK OR FEED/CUT

Press «OK» button to resume printing immediately.

Press «FEED/CUT» button to resume printing after

cutting the paper at the proscribed position.

Press «CANCEL» button to return to the standby

screen without printing.

REDUCE PRINT DATA

[ERRCODE]:MEMORY OVERFLOW

The print data is too complex. Attach extra memory

or reduce the size of the print data.

This error is automatically cleared after approximately

15 seconds.

Содержание 360C










































































































































































































































































































Результаты поиска

Содержание 360C

Отзывы:

Бренды по названию

Популярные бренды

Microcom 360C, Руководство оператора

Результаты поиска

Содержание 360C

Отзывы:

Бренды по названию

Популярные бренды