Microcom 360C, Руководство оператора

Страница: 45 / 297

44
Connecting Using WPS
If the wireless LAN access point supports WPS, the connection to the wireless LAN can be made
easily by using the easy setup button (WPS button).
Follow the procedure below for the setup.
1
Confirm the position of the easy setup button and when to press the button by
referring to the user manual of the wireless LAN access point.
2
Confirm that the wireless LAN access point has been activated and is
functioning normally.
3
Turn on the printer. When [SETUP WIRELESS?] appears, select [YES]. Proceed
to Step 6.
4
Press «
∧
» button or «
∨
» button on the operator panel to display
[WIRELESS SETTING], and then press the «OK» button.
5
Enter the Admin password, and then press the «OK» button.
·
The default password is 999999.
6
Press up on the operator panel to select [ENABLE], and then press the «OK» button.
7
Press «
∧
» button or «
∨
» button on the operator panel to display [WPS SETUP],
and then press the «OK» button.
8
Select [WPS-PBC], and then press the «OK» button.
9
Select [YES], and then press the «OK» button.
10
The Printer starts searching for wireless LAN access points. During 2 minutes,
press the easy setup button for the wireless LAN access point for a few seconds.
11
Once the setup completion screen is displayed, it indicates that the wireless LAN setup has
completed.
Set the IP Address
Set a different IP address for the wireless LAN from that of the wired LAN. Enter the setting menu and
make the settings by the following procedure.
1
Press «
∧
» button or «
∨
» button on the operator panel to display
[WIRELESS SETTING], and then press the «OK» button.
2
Enter the Admin password and then press the «OK» button.
·
The default password is 999999.