Microcom 360C, Руководство оператора

Страница: 103 / 297

102
·
Paper Weight
Set the weight of the paper to use. You can set LIGHT, MEDIUM LIGHT,
MEDIUM, MEDIUM HEAVY, HEAVY, ULTRA HEAVY1, ULTRA HEAVY2.
13
Press «
∨
» button once to display [MEDIAWEIGHT], and press «OK» button.
14
With the setting flashing, press «
∧
» button or «
∨
» button to display the value
you want to set, and press «OK» button.
15
Confirm that the setting stops flashing and "*" is displayed to the right of the value
you want to set.
·
Cut Type
Set the type of mark used for cutting the paper. Set it according to the paper to use. When the paper has a
black mark on the surface that is printed on: B/M(FRONT) When the paper has a black mark on the surface
that is not printed on: B/M(BACK) For paper with a hole in the center: CENTER HOLE
For paper without a hole in the center: SIDE HOLE for paper without a mark: LENGTH
16
Press «
∨
» button once to display [CUT TYPE], and press «OK» button.
17
With the setting flashing, press «
∧
» button or «
∨
» button to display the value
you want to set, and press «OK» button.
18
Confirm that the setting stops flashing and "*" is displayed to the right of the value
you want to set.
19
If you set [LENGTH], proceed to step 23.
If you set something other than [LENGTH], proceed to step 20.
·
Cut Position
This setting specifies the cut position of paper with a black mark or hole. When set to 0 mm, the paper is cut
at the center of the black mark or hole. The values that can be set are indicated below.
Paper with a black mark: -6.5 mm (-0.25 inches) to the paper length Paper with a hole: -6.5 mm to 6.5 mm (-
0.25 inches to 0.25 inches)
·
Generally, set this to 0 mm when printing on paper with a hole. If the paper cannot be cut in
the center of the hole, change the setting.
20
Press «
∨
» button twice to display [CUT POSITION SET], and press «OK» button.
21
With the setting flashing, press «
∧
» button or «
∨
» button to display the value
you want to set, and press «OK» button.
22
Confirm that "*" is displayed to the right of the value you want to set.
23
Press «ONLINE» button, or press «BACK» button until "READY TO PRINT" is
displayed.