MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 63 / 92

RYZ
ENGINE 5-25
Immobilise the clutch dog with the special tool.
Special tool (C)
Tighten the nut.
Nut tightness torque:
7.5 daN•m (75 N•m)
Fold over the clutch nut tab washer.
Fit the clutch control lever with its spring and its washer.
Fit the pusher (8), the ball (9) and the push rod (10) onto the
primary drive shaft.
Fit the clutch disks beginning with a friction disk (11) and alter-
nating smooth and friction disks (12).
While fi tting, ensure that the marks (a) on the smooth disks are
turned 120º one from the other.
Fit the pressure plate (13), ensuring that the arrow (b) on the
plate coincides with the round mark (c) on the clutch dog.
Fit the springs (14) on the pressure plate and the 4 bolts and
washers (5).
Bolts tightness torque:
0.5 daN•m (5 N•m)
2)
3)
4)
5)
6)
7)
8)
9)
10)
5