MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 20 / 92

RYZ
3-4 MAINTENANCE AND COMMISSIONING
BATTERY PREPARATION (EXCEPT MAIN-
TENANCE-FREE BATTERIES)
Remove the battery
Remove the six fi ller plugs and the air vent plug.
Replenish with electrolyte up to the
“UPPER LEVEL” mark.
Electrolyte:
(35% sulphuric acid = 1.28 g/cm)
Allow the battery to stand for approximately half an hour.
Top up if necessary.
Charge the battery for at least 2 hours at an intensity of 400 mA
(0.4 A).
Refi t the battery and connect the vapour vent pipe.
Connect the red cable to the positive battery terminal and the black
cable to the negative battery terminal.
CHECKING LEVELS
Check the gearbox oil level.
Check the coolant level.
Check the brake fl uid level.
COMMISSIONING THE FUEL AND OIL
CIRCUITS
Put 1 litre of unleaded petrol in the fuel tank. This should be 95 or
98 octane mixed with 3% Motul 510 semi-synthetic 2-stroke oil.
Put Motul 510 semi-synthetic 2-stroke oil in the oil tank.
Engine oil:
Motul 510 semi-synthetic 2-stroke oil
Start up the engine and disconnect the special tube entering
the carburettor to check that the oil is fl owing drop by drop (the
speed of the drops increases with the engine revs).
Complete the fi lling of the fuel tank with unleaded 95 or 98
octane petrol without oil mixture.
1)
2)
3)
4)
5)
6)
7)
8)
1)
2)
3)
1)
2)
3)
4)
3
COMMISSIONING
WARNING:
A continuación, eventualmente se deberá restablecer el
nivel de la batería después de una carga completa, utili-
zando exclusivamente agua destilada.