MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 41 / 92

RYZ
N.B.:
The following operations do not require the engine to be re-
moved.
REMOVING THE CYLINDER HEAD
Remove the seat – see “Removing the seat” in Section
4 “CHASSIS”.
Remove the fuel tank – see “Removing the fuel tank” in Section
4 “CHASSIS”.
Drain the cooling circuit (drain screw on the water pump).
Remove the radiator/cylinder head pipe (1).
Disconnect the carburettor heating pipes (2).
Disconnect the temperature sensor.
Remove the suppressor.
Remove the spark plug.
N.B.:
To remove the cylinder head, see corresponding chapter
in this section.
DISMANTLING THE CYLINDER-PISTON ASSEMBLY
Remove the seat – see “Removing the seat” in Section
4 “CHASSIS”.
Remove the fuel tank – see “Removing the fuel tank” in Section
4 “CHASSIS”.
Remove the exhaust – see “Removing the exhaust” in Section
4 “CHASSIS”.
Drain the cooling circuit (drain screw on the water pump).
Remove the radiator/cylinder head pipe.
Disconnect the carburettor heating pipes.
Remove the securing bolts from the front support on the chas-
sis cradle.
1)
2)
3)
4)
5)
6)
7)
8)
1)
2)
3)
4)
5)
6)
7)
OPERATIONS THAT CAN BE CARRIED OUT ON THE ENGINE
ENGINE 5-3
5