MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 35 / 92

RYZ
CHASSIS 4-13
4
ADJUSTMENT
• Idle: screw (7).
• Mixture: screw (8).
DISMANTLING THE VALVES
Remove the carburettor – see “Removing the carburettor” in
this section.
Remove the four bolts on the inlet connector, two of them (1)
using the 4mm male safety spanner.
Special tool – 4 mm safety spanner
Ref. 25 0020001
Remove the connector and the inlet valve.
CHASSIS
REMOVAL
N.B.:
This method is only valid when changing the chassis. In
the event of a chassis change as a result of an accident, it
will be necessary to complete the repair method or change
the damaged elements.
Remove the seat – see “Removing the seat” in this section.
Remove the fuel tank – see “Removing the fuel tank” in this
section.
Remove the side covers.
Disconnect and remove the battery.
Disconnect the rear wiring and the rear brake light switch.
Remove the exhaust assembly.
Remove the rear brake fl uid reservoir and the master cylinder
without disconnecting it.
Loosen the clamp on the air fi lter hose.
Remove the top securing bolt on the shock absorber.
Remove the two rear chassis securing bolts on the main chassis.
Remove the rear chassis assembly.
Remove the chain.
1)
2)
3)
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)