MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 44 / 92

RYZ
Hang the engine on the top rear securing shaft (2).
Insert the engine securing shaft into the front support (3) and
the two chassis strengtheners (4).
Insert the rear bottom securing shaft (5).
MOUNTING THE ENGINE ON ITS SUPPORT
Mount the engine on the engine support mounting.
Special tool (A)
Immobilise the motor on the mounting with two rubber pegs.
Mount the assembly onto the engine support while held in a
workbench clamp.
Special tool (B)
REMOVING THE MAGNETO
Remove the magneto cover.
Remove the paper gasket.
Immobilise the rotor (1) with a front pivot spanner (2).
Remove the nut.
N.B.:
Depending on the model, the rotor acts as a crown gear
for the starter motor.
2)
3)
4)
1)
3)
3)
1)
2)
3)
4)
5-6 ENGINE
DISMANTLING THE ENGINE
5