MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 80 / 92

RYZ
STARTING THE SYSTEM
On switching on (key from OFF to ON), the system provides the
user with a series of data, which, in order to simplify things, are
shown on different screens in the form of pages:
First page: software version and date. This information only
appears during the fi rst instrument panel installation.
2) Second page: glass check; all the glass segments remain lit
up for 3 seconds.
Third page: wheel circumference, measurement unit (only in
the case of km/h), number of pulses for each turn of the wheel
and number of pulses for each engine revolution (see fi gure).
At the same time as displaying the aforementioned screens,
the system also checks the indicator lights
and the glass backlighting: all the indicator lights come on and
then go off at the end of the screen check.
Once all of this has been completed, the system displays nor-
mal view.
FIRST INSTRUMENT PANEL INSTALLATION
The values that the instrument panel has registered by default
are:
Wheel circumference: 2,205 mm.
Unit of measurement: km/h for speed and km for distance.
Pulses per turn of the wheel: 1.
Pulses per engine revolution: 1.
To alter any of these parameters it is necessary to follow the
steps described in the CONFIGURATION part of this section.
N.B.:
During the fi rst instrument panel installation, the version
and date of the software incorporated always appear on the
screen.
6-12 ELECTRICAL SYSTEM
6
1)
2)
3)
4)
5)
1)
2)
3)
4)