MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 73 / 92

RYZ
ELECTRICAL SYSTEM 6-5
DIGITAL INSTRUMENT PANEL
(WHERE FITTED)
USE
BUTTON FUNCTIONS
The button can be used to:
Move from one function to another.
Set the trip meter, chronometer and average velocity display
to zero.
Alter the wheel circumference value, the unit of measurement
and the number of pulses per wheel turn or engine revolution.
It is always possible to pass from one function to another, regardless
of the status of the machine – in movement or halted. The only thing
required is to press the button briefl y (1 second),and on releasing it,
the new screen appears with the new function.
Zeroing of the trip meter, as well as adjusting the chronometer and
average speed display can be carried out with the machine either
halted or in motion, in accordance with the procedures described in
the following paragraphs.
The CONFIGURATION menu can only be accessed with the ma-
chine halted, by positioning in TOD function and holding the button
down for 5 seconds.
Data will only be memorised by leaving the confi guration menu by
means of the mode button.
SUCCESSION OF THE FUNCTIONS
It is always possible to pass from one function to another, either with
the machine halted or in motion, by using the button and in the follo-
wing sequence:
TD LAP AVE TOD RPM
See the functions in the procedures described in the following pa-
ragraphs.
1)
2)
3)
6
SPEED
Button inactive
The confi guration
menu cannot be
accessed
KEY
OFF
ON
All the button
functions are enabled
ON
-
ON
ON
BUTTON
-
>0
0
ASSOCIATED
FUNCTIONS