MFJ MFJ-1270C, Системное руководство

Страница: 90 / 264

MFJ-1270C/1274C MANUAL ADVANCED OPERATION
Page 81
A.
Type:
L <CR>
B. The Mailbox will respond with a list of currently used slots in the
following format:
Slot:## To: From: Subject:
Where Slot## column is the number of the slot which the messages are in. The
lower case t is the
Type Flag block. The lower case m is the Message Flag
block. The To: column will contain the callsign of the person who the message is
addressed to. The From: column will contain the callsign of the person who left
the message. The Subject: column will contain a brief message title.
Note that the number of slots for an MFJ TNC without expanded memory is 30.
For an MFJ TNC with the expanded mailbox memory installed the maximum
slots per memory bank is 99.
After the Mailbox lists all messages it will issue the Mailbox prompt:
nn free {n} Mailbox (B,E,H(elp),J,K,L,M,R,S,T) >
6. Anyone who accesses the Mailbox can read messages or which are
addressed to him/her. Also a message which is a addressed to ALL, such as
bulletins can be read by anyone. Messages can be read by two (2) different
methods. Below are the two methods:
A. This method will allow the remote user, local or remote SYSOP to read a
group of messages. This is only good for a group of messages with the same
callsign as MYcall. The set conditions of the Type or message flags have an
effect on a read process. They can be set to an N, Y or an F. To perform this
type:
R <CR>
B. Messages can also be read individually by the slot number. This is good for
reading other messages like bulletins or messages addressed to ALL. In order do
an individual read type:
R## <CR>