MFJ MFJ-1270C, Системное руководство

Страница: 87 / 264

MFJ-1270C/1274C MANUAL ADVANCED OPERATION
Page 78
Paging SYSOP; any key aborts
The Mailbox will page the SYSOP by ringing the SYSOP's terminal bell 30
times. If the SYSOP is at his or her terminal, the asterisk character will appear
on the screen every time the terminal bell (CTRL-G) rings. If the SYSOP does
not answer the Mailbox will send the message back to the user saying no answer.
Below is an example of a typical screen:
Paging SYSOP; any key aborts...
******************************No answer
The remote user may abort the SYSOP page by sending packet to the Mailbox.
If the SYSOP does answer the page then the SYSOP can enter CHAT command,
then converse one-on-one with the remote user.
This concludes the explanation of the commands which are on the Mailbox
command line. Now lets get into a little of the Mailbox operation. If you have
any questions about the Mailbox commands, we believe they will be answered in
this section.
Mailbox Operation
1.
First establish a connection to the Mailbox station.
2.
If the Mailbox of the station to which you are trying to connect with is ON,
then it will answer back with the Mailbox prompt:
Mailbox Ready
nn free {n} Mailbox (B,E,H(elp),J,K,L,M,R,S,T) >
Note: The nn free indicates the amount of RAM space available for messages in
the Mailbox to which you are connected to. The nn will be no higher than 65K,
if a 512K or a 128K Mailbox is in operation. If the Mailbox is 32K then nn will
be 32K.
Note: The{n} indicates the memory bank being used for the Mailbox. Please
refer to the explanation of the M command for the Mailbox, in this section.