MFJ MFJ-1270C, Системное руководство

Страница: 180 / 264

MFJ-1270C/1274C MANUAL COMMANDS
Page 171
PAS S n Mode: Packet Default: $16 <CTRL-V>
Parameter:
n 0 - $7F, Specifying an ASCII character code.
This command selects the ASCII character used for the "pass" input editing
command. The parameter n is the ASCII code for the character you want to type
in order to include the following character in a packet or text string. You can enter
the code in either hex or decimal.
You can use this character to send any character in packets, even though that
character may have some special function. For example, suppose you have set
COMMAND 3 , specifying that <CTRL-C> is your Command Mode entry
character. If you use a Bulletin Board program that requires a <CTRL-C> to
escape from some operation, you will type
<CTRL-V>
<CTRL-C>
to insert a <CTRL-C> character in your packet. Of course, if you do this
frequently you would be better off to change your Command Mode entry
character.
A common use for the pass character is to allow <CR> to be included in the
BTEXT and CTEXT messages. Similarly, you can include <CR> in text when
you are in Converse Mode, to send multi-line packets. (The default send-packet
character is <CR>.)