MFJ MFJ-1270C, Системное руководство

Страница: 170 / 264

MFJ-1270C/1274C MANUAL COMMANDS
Page 161
MNONP RIN ON|OFF default: ON
Parameter:
ON Enables printing Non-Printable Characters
OFF Discards all Packets containing Non-Printable
Characters
The setting of the
MNONPRINT parameter determines whether monitored
packets containing non-printable characters (i.e., characters other than ASCII
CR, LF, BEL, and not between $20 and $7e) are monitored or simply discarded.
The default setting permits monitoring all information packets (subject to
LCALLS , MONITOR , MNONAX25 , etc). When MNONPRIN is OFF ,
information packets containing one or more non-printable characters are
discarded. You may find this command helpful when there are binary transfers on
the channel that you'd rather not monitor.
MNONPRIN has no effect on data
received during connections.
M ONITOR ON|OFF Mode: Packet Default: ON
Parameters:
ON Monitoring of all packet activity is enabled.
OFF Monitoring of all packet activity is disabled.
If
MONITOR is ON and the MFJ TNC is not in Transparent Mode, packets not
addressed to your MFJ TNC may be displayed. The addresses in the packet are
displayed along with the data portion of the packet, e.g.:
N2WX>W5FD-3: I'm ready to transfer the file now.
The calls are separated by a ">" and the sub-station ID field (SSID) is displayed if
it is other than 0. The
MALL , BUDLIST , and LCALLS commands determine
which packets are to be monitored. The MCON command controls the action of
monitor mode when the MFJ TNC is connected. All monitor functions are
disabled in Transparent Mode. If
MONITOR is OFF all packets are still
monitored, but only packets addressed to you are printed on the terminal screen.