MFJ MFJ-1270C, Системное руководство

Страница: 120 / 264

MFJ-1270C/1274C MANUAL COMMANDS
Page 111
XFLOW was ON
This reminds you of what you have done, and indicates that the value has
been
successfully changed.
If you type something the MFJ TNC can't understand you will get an error
message. If you type an unrecognized command, you will see the message ?EH.
If you get a command name correct, but the arguments are wrong, you will see
the message ?BAD. A complete list of error messages appears at the end of this
chapter. For example,
cmd:
ASDFASDF This isn't a command.
?EH
cmd:
BEACON E A parameter was left out.
?BAD
Command List
The commands are listed alphabetically, and each command entry contains
several sections, as follows.
COMMAND NAME
The boldface command name at the top of the entry is the word you will type in
order to have the MFJ TNC execute this command. The command name is
printed with some letters underlined. These letters form the minimum abbre-
viation that you may use and still have the MFJ TNC understand your command.
Of course, you may type out the entire command word, or any abbreviation
longer than the minimum abbreviation, if you like. The command will still be
accepted.
For example, the command
MY CALL may be specified by simply typing MY.
The abbreviation M is not sufficient (and will be interpreted as a different
command), but MY, MYC, MYCA, MYCAL or MYCALL are all acceptable.
If the command requires parameters, they will be indicated after the command
name.
Default