MFJ MFJ-1270C, Системное руководство

Страница: 138 / 264

MFJ-1270C/1274C MANUAL COMMANDS
Page 129
The same Command Mode entry character used for exit from Converse Mode is
used to exit Transparent Mode, but the procedure is different. (The Command
Mode entry character is set by
COMMAND .) Three Command Mode entry
characters must be entered less than n seconds apart, with no intervening charac-
ters, after a delay of n seconds since the last characters were typed. After a final
delay of n seconds, the MFJ TNC will exit Transparent Mode and enter Command
Mode. You should then see the prompt
cmd:
The diagram below illustrates this timing.
last
first second third TNC
terminal command command command now in
input mode mode mode Command
| entry entry entry Mode
| character character character |
| | | | |
| | | | |
|<-----longer------>|----<-shorter->----|----<-shorter->----|<--------n-------->|
than n than n than n
CMS G ON|OFF Mode: Packet Default: OFF
Parameters:
ON A text message is sent as the first packet after a connection is
established.
OFF The text message is not sent.
CMSG enables automatic sending of the message set by CTEXT whenever your
MFJ TNC accepts a connect request from another TNC.
For example, if you have left your station running even though you don't want to
operate just now, you might want to set
CMSG ON to let people know that you
can't talk when they connect to your MFJ TNC. When you are ready to operate,
you would set
CMSG OFF .
CMSGD ISC ON:OFF Mode: Packet Default: OFF