MFJ MFJ-1270C, Системное руководство

Страница: 159 / 264

MFJ-1270C/1274C MANUAL COMMANDS
Page 150
With HEALLED set OFF , the LEDs function normally as before.
HI D ON|OFF Mode: Packet Default: OFF
Parameters:
ON Enables HDLC identification by a digipeater.
OFF Disables HDLC identification.
This command is used to enable or disable the sending of identification packets by
the MFJ TNC. If
HID is OFF , the MFJ TNC will never send an identification
packet. If HID is ON , the MFJ TNC will send an identification packet every 9.5
minutes if the station is digipeating packets. The ID command allows the operator
to send a final identification packet if the station is being taken off the air.
An identification consists of an unsequenced I frame whose data field is your
station identification. The identification packet is addressed to the "CQ" address
set by the
UNPROTO command. Your station identification is your callsign as
set by MYCALL , with "/R" appended.
I D Mode: Packet
ID is an immediate command. It will send a special identification packet. ID can
be used to force a final identification packet to be sent as a digipeater station is
being taken off the air. The identification packet will be sent only if the digipeater
has transmitted since the last automatic identification.
An identification consists of an unsequenced I frame whose data field is your
station identification. The identification packet is addressed to the "CQ" address
set by the
UNPROTO command. Your station identification is your callsign as
set by MYCALL , with "/R" appended.