MFJ MFJ-1270C, Системное руководство

Страница: 192 / 264

MFJ-1270C/1274C MANUAL COMMANDS
Page 183
Thus, what would have looked like "|B" now appears as "|B:<callsign>:". This
option is very useful for human operators trying to operate multiple simultaneous
connections. It is probably less useful for "host" operations.
Note that, in the first example, the
STREAMSW itch characters "|A" and "|B" with
no ":" after them were entered by the operator of the TNC to switch streams for his
multiple- connect QSO(s). If you intend to operate multiple connections (as
opposed to having your "host" computer operate multiple connections), use of this
option is recommended.
STREAMD B ON|OFF Mode: Packet Default: OFF
Parameters:
ON Double all received STREAMSW itch characters.
OFF Do not "double" received STREAMSW itch characters.
This command is used to display received
STREAMSW itch characters by
"doubling" them. The example below illustrates this action.
With
STREAMDB on, and STREAMSW itch set to "|", the following might be
displayed from your MFJ TNC:
|| this is a test.
In this case the sending station actually transmitted
| this is a test.
The same frame received with STREAMDBL OFF would be displayed as:
| this is a test.
When operating with multiple connections, this is useful for differentiating
between
STREAMSW itch characters received from other stations and
STREAMSW itch characters internally generated by your MFJ TNC.
NOTE : The STREAMSW itch character must NOT be one of the stream letters
(A - J) for this command to function properly.