Meyer LPV 3, Руководство пользователя

Страница: 45 / 72

44
45
Gasoline Engine Spreader Controller
The gasoline engine spreader controller is intended to control the following functions of the spreader: engine start/stop,
engine choke, throttle increase/decrease, and clutch on/off. Control system is made up of the control panel, and harness.
Controller is intended to be permanently mounted inside the cab of the vehicle.
OPERATION
Controller is not functional until the ON /OFF switch is switched to the
ON position. Moving the ON/OFF switch to the OFF position will
stop the engine and shut off power to the entire controller.
1. Move the ON/OFF switch up to the ON position.
2. Set engine throttle to choke by pressing and holding the
THROTT TTON up for two seconds.
3. ress and hold the START/CON OR button in the up position
until the engine starts. Note continuing to hold the START button
after the engine starts will result in damage to the engine.
4. Once engine starts press the THROTT button down to remove
the throttle from choke.
5. ress the THROTT button up or down until desired engine
RPM is achieved.
6. Engage the electric clutch by pressing the START/CON OR
button down.
7. Disengage the electric clutch by moving the START/CON OR
switch to the middle position.
8. ngine can be shut off by moving the ON/OFF button down
to the OFF osition.
ON/OFF
THROTTLE
HIGH/LOW
ENGINE START
CONVEYOR
ON/OFF
Wireless Gasoline Engine Control System
The wireless gasoline engine controller is intended to control the start/stop, throttle increase/decrease, and electric
clutch on/off functions. The control system consists of a transmitter and a receiver. The receiver is mounted on the
spreader near the gasoline engine. The transmitter is intended to remain in the vehicle cab or with the operator.
OPERATION
1.
Set engine throttle to choke by pressing and holding the throttle
INCR AS button for two seconds.
2. ress and hold engine START button until engine starts. Note
continuing to hold the engine start button after the engine starts
will result in damage to the engine.
3. Once engine starts, press the throttle D CR AS button to
remove throttle from the choke position.
4. ress the throttle INCR AS or throttle D CR AS button until
desired engine RPM is achieved.
5. ngage electric clutch by pressing CON OR button once.
6. Disengage electric clutch by pressing CON OR button once.
7. ngine can be stopped by pressing and holding the N IN
I button until engine stops. Note pressing the engine kill
button will also automatically disengage the electric clutch.
SPECIFICATIONS
olt
Fre uency MHz S / MHz urope
Transmitter battery CR ithium utton Cell
BUTTON FUNCTIONS
1.
Conveyor ON/OFF
2. Not sed
3. Throttle Down
4. Throttle Up
5. Engine Start
6. Engine Kill
7. Not sed
8. Not sed
7 –––––––
5 –––––––
3 –––––––
1 –––––––
––––––– 8
–––––––
6
––––––– 4
–––––––
2
Receiver
Transmitter