Meyer LPV 3, Руководство пользователя

Страница: 64 / 72

64
65
Maintenance
General Troubleshooting
Condition Possible Cause Correction
Noisy operation
Loose or damaged drag chain Ad ust or replace drag chain
Drag chain needs lubrication Lubricate drag chain
Foreign ob ect in conveyor Remove object
Faulty bearing Replace bearing
Spinner disc unbalanced Remove material from spinner disc
Drag chain contacting conveyor frame Ensure drag chain is centered in conveyor
Material not exiting
discharge chute Conveyor discharge clogged Clear material from discharge
Material bridging inside hopper Use free flowing material
Feed gate closed Open feed gate
Inverted Vee not installed Install inverted Vee
Material leaking
from conveyor Drag chain not properly adjusted Ad ust drag chain tension
Chain wiper not properly adjusted Ad ust chain wiper position
Material too fine Use coarser material
Spinner disc not
turning
Loose or damaged roller chain Ad ust or replace roller chain
Spinner disc jammed Clear jam from spinner disc
Electric clutch not engaged Engage clutch
Sprocket key missing Inspect and replace key
Troubleshooting Guide
Wireless Controller Troubleshooting
Condition Possible Cause Correction
Controller does not
function
Receiver has no power See receiver has no power troubleshooting
Transmitter is not programmed to the receiver See programming instructions
Transmitter is defective See transmitter troubleshooting
Receiver is defective See receiver troubleshooting
Receiver has no power Receiver harness is not connected Connect harness to spreader control cable
Spreader battery is dead or discharged Charge or replace spreader battery
Fuse is blown Replace fuse in spreader control cable
Spreader control cable ground (white wire) is loose
or corroded
Clean and tighten connection
Receiver is defective See receiver troubleshooting
Controller operates
erratically
Receiver harness connection is loose or corroded Clean and reconnect harness
Spreader control cable ground (white wire) is loose
or corroded
Clean and tighten connection
Corresponding spreader component is defective Replace corresponding spreader component
Transmitter is not properly programmed to the
receiver
See programming instructions
Transmitter is defective See transmitter troubleshooting
Receiver is defective See receiver troubleshooting
Troubleshooting Guide